Two-phase damage detection of beam structures under moving load using multi-scale wavelet signal processing and wavelet finite element model

This paper proposes a damage detection method with two phases, namely, localization and quantification, for beam structures subjected to moving load and successfully validates it via a laboratory experiment. Firstly, the discrete wavelet transform (DWT) is applied to decompose the displacement response change induced by a moving vehicle and locate potential structural damages. Then adaptive-scale wavelet finite element model (WFEM) updating is employed to estimate the damage severity in the identified damage regions in a progressive fashion. The elemental scales of WFEM are adaptively changed according to not only the moving vehicle position but also the progressively identified damage regions. Such a method can effectively minimize the number of modeling degree-of-freedoms (DOFs) and updating parameters during optimization. The feasibility and effectiveness of the proposed method is examined through a laboratory experiment with different damage scenarios. The results indicate the proposed method can achieve good consistency between structural modeling, damage scenarios, and load conditions, as well as an optimal tradeoff between damage detection accuracy and efficiency.     

Improved 3D reconstruction method based on the Scheimpflug principle

Optical Review - This paper proposes a 3D reconstruction scheme for monocular cameras based on an improved line structure cursor positioning method and the Scheimpflug principle to overcome the...     

温度对低共熔溶剂影响的二维拉曼光谱研究

低共熔溶剂（DES）作为一种新式的绿色溶剂，在多种化学过程中表现出色，因此在诸多热门范畴都展现出良好的发展潜力。对DES的光谱分析通常局限在一维光谱技术上，但其分辨率低、谱峰重叠严重等缺点，导致光谱数据存在误差。运用二维拉曼光谱（2D Raman），能够明显提高光谱分辨率，并发现重叠峰位置，获得在外扰条件下不同谱峰的变化顺序及其相互作用等重要信息，以实现对复杂体系的精确分析。以氯化胆碱（ChCl）和ZnCl₂合成的DES为例，利用显微共焦激光拉曼光谱仪分别对ChCl和DES进行拉曼实验，发现与ChCl相比，DES中各处峰的整体强度显著下降，原有的谱峰未消失，说明Zn2+的加入没有破坏ChCl的骨架结构。287 cm-1处出现一个新的特征峰，推测有Zn-Cl配位键的伸缩振动。对DES进行升温拉曼实验，发现随着温度的升高，NC₄的不对称伸缩振动峰强度逐渐减小，峰宽变大，峰形变缓，Zn-Cl配位键伸缩振动峰强度逐渐降低，峰位置基本不变，峰形有明显重叠。运用2D Raman技术对溶液内NC₄和Zn-Cl特征峰的变化进行研究，结果表明，随着温度的升高，溶液中发生ChCl向Ch+的解离过程，Zn2+与Cl-形成了多种配合物，ZnCl-₃，Zn₂Cl-₅，Zn₃Cl-₇之间存在相互转化。不同位置的特征峰随温度的变化顺序不同，将特征峰与团簇进行一一归属，得出了各个团簇对温度的敏感程度。基于量子化学中的密度泛函理论，对推测的物质结构进行构型优化和参数计算，证实了其存在的可能性，同时也验证了2D Raman的分析结果准确可行。这些结果将为DES的后续研究提供理论参考，拓展了二维光谱技术的应用范围。     

Estimator of a change point in single index models

This paper considers the problem of change point in single index models. In order to obtain asymptotically valid confidence intervals for the estimation of the change point, the convergence rate and asymptotic distribution of the change point estimate is studied. Some simulation results are presented which show that the numerical performance of our estimator is satisfactory.     

Synthesis and supercapacitive performance of CuO/Cu2O nanosheet arrays modified by hydrothermal deposited NiOOH

Journal of Solid State Electrochemistry - Binder-free, high-performance electrode materials play a critical role for supercapacitors. In this paper, through the electrochemical anodization process,...     

两类五阶解非线性方程组的迭代算法

本文首先根据Runge-Kutta方法的思想,结合Newton迭代法,提出了一类带参数的解非线性方程组F(x)=0的迭代算法,然后基于解非线性方程f(x)=0的King算法,给出第二类解非线性方程组的迭代算法,收敛性分析表明这两类算法都是五阶收敛的.其次给出了本文两类算法的效率指数,以及一些已知算法的效率指数,并且将本文算法的效率指数与其它方法进行详细的比较,通过效率比率R_(i,j)可知本文算法具有较高的计算效率.最后给出了四个数值实例,将本文两类算法与现有的几种算法进行比较,实验结果说明本文算法收敛速度快,迭代次数少,有明显的优势.     

一类新的(2n-1)点二重动态逼近细分

利用正弦函数构造了一类新的带有形状参数ω的(2n-1)点二重动态逼近细分格式.从理论上分析了随n值变化时这类细分格式的C~k连续性和支集长度;算法的一个特色是随着细分格式中参数ω的取值不同,相应生成的极限曲线的表现张力也有所不同,而且这一类算法所对应的静态算法涵盖了Chaikin,Hormann,Dyn,Daniel和Hassan的算法.文末附出大量数值实例,在给定相同的初始控制顶点,且极限曲线达到同一连续性的前提下和现有几种算法做了比较,数值实例表明这类算法生成的极限曲线更加饱满,表现力更强.     

结构系统识别不确定性分析的Bayes方法及其进展

受测试误差、建模误差、数值离散化以及环境变异等因素的影响,结构系统识别过程不可避免地存在不确定性,因此有必要引入概率统计方法来提高其鲁棒性,为工程结构安全监测提供更为可靠的结果.近年来,Bayes(贝叶斯)方法因为其诸多优势在系统识别领域受到了广泛关注.该文梳理了Bayes系统识别的历史脉络和研究进展.从Bayes系统识别的理论框架出发,分析了量化系统识别不确定性两类方法的适用条件与局限性.此外,文章综述了Bayes方法在模态参数识别、有限元模型修正以及结构损伤识别方面进行不确定性分析的理论、实现及其应用.最后对基于Bayes方法进行系统识别研究的发展趋势做出了展望.     

Hydroarylation of terminal alkynes with arylboronic acids catalyzed by low loadings of palladium

The hydroarylation reaction of terminal alkynes with arylboronic acids catalyzed by low(400 ppm) loadings of palladium has been developed. The reaction is broad in scope and high-yielding, even on multigram scale. It is suitable for the synthesis of alkenes labeled with deuterium, and for the late-stage modification of bioactive molecules.